$59,000
Complete Frame off Restoration built to the Extreme!
Chassis:
- stripped down to frame rails and cross members (not taken apart further as these are assembled on frame jigs at AMG)
- every part sand blasted to SSPC-SP10 then taken immediately for powder coating (literally every part!!)
- every structural bold has been chemically stripped and yellow cadmium plated (not zinc!)
- every non-structural bolt replaced with stainless steel
- new springs front…
Complete Frame off Restoration built to the Extreme!
Chassis:
– stripped down to frame rails and cross members (not taken apart further as these are assembled on frame jigs at AMG)
– every part sand blasted to SSPC-SP10 then taken immediately for powder coating (literally every part!!)
– every structural bold has been chemically stripped and yellow cadmium plated (not zinc!)
– every non-structural bolt replaced with stainless steel
– new springs front / rear (front springs are plow springs for weight of hydraulic winch and custom brush guard)
– new shocks front / rear
– new ball joints upper / lower all corners
– new tie rod ends front and rear (yes they have them on rear)
– new Rubber Duck 4×4 PSC Hydraulic Steering w/ Remote Reservoir
Driver Train:
– P400 6.5L Humvee Crate Engine (NEW – US Engine Production)
– P400 upgraded injection pump for ultra low sulfur diesel (NEW – US Engine Production)
– Marine Injectors (NEW – US Engine Production)
– P400 6.5L Upgraded Turbo (NEW – US Engine Production)
– HD lift pump / new ECM / mechanical waste gate (Rubber Duck 4×4)
– 4″ Stainless Steel Exhaust (Rubber Duck 4×4)
– Humvee Cooling Stack w/ 6.5L P400 Intercooler (NEW – US Engine Production)
– 4L80E Hummer H1 OEM 4 Speed Transmission (rebuilt and upgraded for new P400 6.5L)
– NP242 Hummer H1 OEM Transfer Case (resealed)
– Front Differential 2.73 ratio OEM (NEW)
– Rear Differential 2.73 ratio OEM (NEW)
– ARB Air Lockers F/R (NEW – Supplied and installed by ModMafia)
– ARB twin compressor for lockers or trail use (NEW)
– Geared Hub Assembly 1.92 ratio (Rebuilt but fully upgraded to 12k, Blue Hummer Spindle Nuts, ModMafia sight glass covers)
– Half Shafts (NEW – ECV or Expanded Capacity Vehicle shafts stronger than 12k, front differential centered so same shaft all corners)
– ECV Brake Upgrade Front and Rear (NEW – ECV or Expanded Capacity Vehicle OEM Wilwood Calipers and ECV Wilwood 12″ rotors used on M1151/52)
– ECV Brake Booster from M1151/52 (NEW)
– 39.5 Super Swamper Iroks (NEW) on 12 bolt military M998 16.5 wheels with PVC inserts (wheels and inserts supplied by Trailworthy Fab)
– drive shafts rebuilt by Driveline Specialties Inc. Calgary
Body:
– stripped to bare aluminum tub
– complete underside of body is line-x
– complete underside of hood is line-x
– inside corrugated deck is line-x
– 6 months at a professional body shop in Calgary (Western Paint)
– custom titanium silver paint (color code for paint included in paperwork)
– custom upholstery done by Cascade Vans in Calgary (leather seats, leather insert passenger knee mod., black stained OEM console, dash pads)
Audio / Video:
– full audio video system by Simply Structured in Calgary
– custom speaker enclosures for 6.5 drivers by Simply Structured (x4)
– custom subwoofer enclosures for 10″ subs by Simply Structured (x2 under rear seats)
– Alpine iLX-207 head unit
– Alpine backup camera
– Alpine Sirrus XM radio
– Audison Voce AV 5.1k amplifier (x2)
– Audison Voce AV 6.5 drivers (x4)
– Audison Voce AV 3.0 mids (x4)
– Audison Voce AV 1.1 tweeters (x4)
– Audison Voce AVCX 2W MH 2-Way Crossover (x4 for 3.0 + 1.1)
– Focal Speaker Pods (x4 for 3.0 + 1.1)
– JL Audio 10TW3 subwoofers (x2)
– Compustar T11 remote start / remote doors / security system
– Ram Mount Police Car console for overhead console w/ additional 7″ LCD (backup camera always on but also comes on w/ reverse on head unit)
– custom aluminum plate for roof mounting of equipment (powder coated to match interior parts)
Other:
– every custom interior part available from ModMafia!
– full LED lighting (same used on HMMWV) for that rugged look (NEW)
– custom brush guard 2″ D.O.M tubing – powder coated (NEW)
– custom rock rails – powder coated (NEW)
– AM General Alpha Steering wheel w/ H1 logo and center horn mod! (horn typically on windshield wiper stock)
– new windshield and side windows
– professional tinting by Tint Tech LTD Calgary
– new main gas tank and sender (Hummer Parts Guy was having a sale and it compliments the build)
– CTIS tire quick connects w/ internal check valves (when changing a tire without the other side will go flat!)
– every wiring harness including the main harness w/ fuse box is brand new!
– 2″ suspension lift by VAT Quebec Canada (Humvee restoration guys)
– 2″ body lift by Rubber Duck 4×4 with new steering shaft close out panel w/ boot
– 2″ rear bumper lift (all parts laser cut, powder coated, hardware cadmium plated to match) – no disgusting Alpha plastic 2″ strip or metal alternative
– mirrors upgraded to heated w/ LED signals (OEM upgrade supplied by HPG)